Garbage Disposal Installation & Repair performed by Duke's Plumbing

Services · Installation

Garbage Disposal Installation & Repair

Install or repair a residential garbage disposal — replacing jammed or humming units, fixing leaks, and matching horsepower to your household's needs.

What this service involves

A garbage disposal grinds food waste so it flushes down the drain instead of filling your trash. Duke's Plumbing installs and repairs residential disposals — replacing a unit that has jammed, hums but won't turn, or leaks — and matches the new disposal's horsepower to how your household actually uses the sink.

A disposal mounts under the sink between the drain and the trap, with a motor that spins a grinding plate inside a chamber. Common failures are jams (something the grinder can't pass), a humming motor that won't spin (often a stuck flywheel), leaks from the mounting flange or internal seals, and electrical faults. A disposal also needs an electrical outlet and, in many homes, the sink to be shared with a dishwasher.

Typical range:$200 – $550
Garbage Disposal Installation & Repair performed by Duke's Plumbing

When it's needed

Common situations for this service

Signs and scenarios where this service is the right call.

Jammed disposal

A foreign object or hard food jamming the grinder so it won't turn.

Hums but won't spin

A stuck flywheel that may be freeable, or a motor that has failed.

Leaking disposal

A leak from the mounting flange, the discharge connection, or an internal seal.

New installation

Adding a disposal where there isn't one, which may require a new electrical outlet.

What's typically included

  • Diagnosing the fault (jam, motor, leak, electrical)
  • Clearing jams
  • Repairing or replacing the unit
  • Sealing the mounting flange and discharge
  • Confirming dishwasher connection if present

What to consider

Horsepower to match use

Lighter 1/3 HP units suit small households; 1/2 to 3/4 HP units handle more waste and last longer for busy kitchens.

Electrical requirement

A disposal needs a dedicated outlet under the sink. Adding one where none exists may need an electrician.

What not to grind

Grease, bones, coffee grounds, and fibrous scraps like celery shorten a disposal's life and clog drains.

The process

How we approach this service

A clear, step-by-step view of what to expect.

1

Diagnose

We identify whether the issue is a jam, the motor, a leak, or the electrical.

2

Repair or replace

We clear the jam or replace the unit with one sized to your household.

3

Seal & test

We seal the mounting flange, connect the discharge, and confirm it drains cleanly.

Pricing

What affects the cost

Final pricing depends on the specifics of your job. These are the factors that shape a quote for this service.

  • Disposal horsepower and model
  • Repair vs. full replacement
  • Whether a new electrical outlet is needed
  • Any sink or cabinet access work
Get an estimate: 510-810-6266

Request a free estimate

Tell us about your garbage disposal installation & repair need and we'll reply promptly — 24/7 for emergencies.

Garbage Disposal Installation & Repair FAQ

Questions about this service

Why does my disposal hum but not turn?

The flywheel is likely stuck. It can often be freed, but if the motor has failed the disposal is replaced. We confirm which it is.

Can you add a disposal where I don't have one?

Often yes, as long as there's an electrical outlet under the sink. If not, an electrician may need to add one first.

A Duke's Plumbing technician carrying a toolbox up the walkway of a residential home

Ready when you are

Get dependable plumbing from a local San Leandro team

Honest diagnoses, clean workmanship, and quick response across the East Bay. Call for an emergency or request a free estimate online.

Serving San Leandro · Oakland · Castro Valley · San Lorenzo · Hayward · Alameda