Toilet Installation performed by Duke's Plumbing

Services · Installation

Toilet Installation

Install or replace a residential toilet — standard, comfort-height, or water-saving models — with a sound wax seal, level set, and leak-free connections.

What this service involves

A properly installed toilet seals correctly to the flange, sits level, and connects to the supply line without leaks. Duke's Plumbing removes the old toilet, inspects and replaces the wax ring and supply line as needed, and sets the new unit so it drains reliably and stays put. We can also advise on comfort-height and water-saving models.

Toilet installation is more than setting the bowl on the flange. The flange must be intact and at the right height, the wax ring creates the seal that stops sewer gas and leaks, the closet bolts hold the toilet level, and the supply line connects to the fill valve. A loose or rocking toilet can crack the flange or leak slowly over time.

Typical range:$250 – $650
Toilet Installation performed by Duke's Plumbing

When it's needed

Common situations for this service

Signs and scenarios where this service is the right call.

Replacing an old toilet

An aging, cracked, or constantly running toilet is often more cost-effective to replace than to keep repairing.

Upgrading to a water-saving model

Newer low-flow toilets reduce water use per flush without sacrificing performance.

Comfort or accessibility

A comfort-height toilet is easier on the knees and back and is a common bathroom upgrade.

What's typically included

  • Removing the old toilet
  • Inspecting and replacing the flange or wax ring as needed
  • Setting the new toilet level and secured
  • Supply line connection and leak test
  • Confirming flush and fill operation

What to consider

Rough-in size

The distance from the wall to the bolts (the rough-in, usually 12 inches) must match the new toilet. We confirm before installing.

Flange condition

A cracked or low flange should be repaired so the new toilet seals and stays level.

Water-saving choices

Modern low-flow toilets meet performance standards and reduce water use. We can advise on models that fit your bathroom.

The process

How we approach this service

A clear, step-by-step view of what to expect.

1

Remove & inspect

We take out the old toilet and check the flange and subfloor.

2

Set & seal

We install a fresh wax ring, set the toilet level, and secure the closet bolts.

3

Connect & test

We connect the supply line and confirm a clean flush and leak-free fill.

Pricing

What affects the cost

Final pricing depends on the specifics of your job. These are the factors that shape a quote for this service.

  • Toilet model and features
  • Whether the flange needs repair
  • Supply line replacement
  • Any flooring or access work
Get an estimate: 510-810-6266

Request a free estimate

Tell us about your toilet installation need and we'll reply promptly — 24/7 for emergencies.

Toilet Installation FAQ

Questions about this service

How long does a toilet installation take?

A straightforward swap with a healthy flange is usually about an hour or two. Repairs to the flange or flooring add time.

Will you dispose of my old toilet?

We remove and haul away the old unit as part of the install.

A Duke's Plumbing technician carrying a toolbox up the walkway of a residential home

Ready when you are

Get dependable plumbing from a local San Leandro team

Honest diagnoses, clean workmanship, and quick response across the East Bay. Call for an emergency or request a free estimate online.

Serving San Leandro · Oakland · Castro Valley · San Lorenzo · Hayward · Alameda